GSP Default login and password

[M Zubair_1]

Does anyone knows what is the default login and password for GSP (Service Processor). I am trying to login thru web concole on a RP5470.

[Mark Grant]

Admin/Admin I think!

[M Zubair_1]

Nope

[Jakes Louw]

I can confirm that it is Admin/Admin (capital letters are significant!)

[Julian Perez_1]

Hello,

Admin/Admin is in new rp8400, superdome ...

Try using return key as response to both login and password. These are defaults for GSP prompt in your system.

Best regards,

Julian

[Fabio Ettore]

Hi,

when GSP requests login and password just hit carriage return on both.

I hope this helps you.

Best regards,
Ettore

[M Zubair_1]

Thanks all,
I have tried all of the above suggestions but none of them worked.

[Fabio Ettore]

Hi again,

then try to reset it, here:

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5191-96018/A5191-96018_top.html&con=/hpux/onlinedocs/A5191-96018/00/00/21-con.html&toc=/hpux/onlinedocs/A5191-96018/00/00/21-toc.html&searchterms=gsp&queryid=20040127-072328

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=124576

Just few links above from docs and forums.

Good luck!
Ettore

[G. Vrijhoeven]

Hi Mohammad,

Default it should be empty ( so enter/enter ) if not i suggest resetting the GSP.......
May be a stupid question but what kind of login do you get? ( HPUX or GSP ).

Gideon

[Sundar_7]

Mohammad,

I assume u r able to log on to the OS.

If yes then issue the following command. This will clear all the user names and password from GSP.

# stty +resetGSP < /dev/GSPdiag1

-- press 'p'

#

Press B and enter the GSP.

Thanks,

Sundar.