HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP Default login and password

 
M Zubair_1
Advisor

GSP Default login and password

Does anyone knows what is the default login and password for GSP (Service Processor). I am trying to login thru web concole on a RP5470.
10 REPLIES 10
Mark Grant
Honored Contributor

Re: GSP Default login and password

Admin/Admin I think!
Never preceed any demonstration with anything more predictive than "watch this"
M Zubair_1
Advisor

Re: GSP Default login and password

Nope
Jakes Louw
Trusted Contributor

Re: GSP Default login and password

I can confirm that it is Admin/Admin (capital letters are significant!)
Trying is the first step to failure - Homer Simpson
Julian Perez_1
Valued Contributor

Re: GSP Default login and password

Hello,

Admin/Admin is in new rp8400, superdome ...

Try using return key as response to both login and password. These are defaults for GSP prompt in your system.

Best regards,

Julian
Keep the faith
Fabio Ettore
Honored Contributor

Re: GSP Default login and password

Hi,

when GSP requests login and password just hit carriage return on both.

I hope this helps you.

Best regards,
Ettore
WISH? IMPROVEMENT!
M Zubair_1
Advisor

Re: GSP Default login and password

Thanks all,
I have tried all of the above suggestions but none of them worked.
Fabio Ettore
Honored Contributor
G. Vrijhoeven
Honored Contributor

Re: GSP Default login and password

Hi Mohammad,

Default it should be empty ( so enter/enter ) if not i suggest resetting the GSP.......
May be a stupid question but what kind of login do you get? ( HPUX or GSP ).

Gideon
Sundar_7
Honored Contributor

Re: GSP Default login and password

Mohammad,

I assume u r able to log on to the OS.

If yes then issue the following command. This will clear all the user names and password from GSP.

# stty +resetGSP < /dev/GSPdiag1

-- press 'p'

#

Press B and enter the GSP.

Thanks,

Sundar.
Learn What to do ,How to do and more importantly When to do ?
Bjoern Gothe_1
Occasional Advisor

Re: GSP Default login and password

Hi Mohammed,

If you mean a GSP of a L-, N- or A-Class there is no default user or password. You can always use ENTER/ENTER but if there was set another administartor user and password you will be only a common operator and do not have all permissions. You can reset the GSP to the factory defaults on the local console either with the GSP reset button (only accessable on the N- and A-Class) or use the GSP command XD. But if you reset GSP to factory defaults all lanconsole configs will be lost.

If you mean the MP (formerly GSP) on Matterhorn, Keystone or Superdome, the default GSP login is Admin/Admin.

I hope this will help.

Bye Bjoern