cancel
Showing results for 
Search instead for 
Did you mean: 

GSP IP

 
manu_15
Occasional Advisor

GSP IP

Hi...

How can I find out the GSP ip from normal login.

Thanks in advance
4 REPLIES 4
Robert-Jan Goossens
Honored Contributor

Re: GSP IP

Hi,

Not direct possible from the hpux prompt, but you can enter the GSP from the console and check the ip-address.

Detailed info in this thread.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=125816

Hope this helps,
Robert-Jan
DCE
Honored Contributor

Re: GSP IP

If you are logged vai the LAN connection on the GSP, the ncontrol_B will get you in. If you are logged in via a LAN card in an io slot, you cannot reach the GSP
Ranjith_5
Honored Contributor

Re: GSP IP

Hi,

As far as I know there is no methods to find out console IP from the telnet session.

you can do the following to get the information.

MP login: Admin
MP password:

* Your connection is via Telnet. For improved security this MP *
* now supports SSH-2. Telnet can be disabled via the SA command. *

(c)Copyright 2000 Hewlett-Packard Co., All Rights Reserved.

Welcome to
Superdome's Management Processor


Utility Subsystem FW Revision Level: 15.14



MP MAIN MENU:

CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
FW: Firmware Update
HE: Help
X: Exit Connection

[SD_CO1] MP> CM

Enter HE to get a list of available commands

(Use ^B to return to main menu.)
[SD_CO1] MP:CM> LS

Current configuration of MP customer LAN interface
MAC address : 00:10:83:fd:10:f4
IP address : 192.168.0.1 0xac117007
Name : SD_CO1
Subnet mask : 255.255.255.0 0xffffff00
Gateway : 192.168.0.254 0xac1170fe
Status : UP and RUNNING


Current configuration of MP private LAN interface
MAC address : 00:ab:a0:00:9e:cc
IP address : 192.168.2.54 0xc0a8020c
Name : mkus-02
Subnet mask : 255.255.255.0 0xffffff00
Gateway : 192.168.2.54 0xc0a8020c
Status : UP and RUNNING

[SD_CO1] MP:CM>

Regards,
Syam
Ranjith_5
Honored Contributor

Re: GSP IP

I missed one thing. The above commands you have to enter in the console of the server. Use a serial console cable to make the connection. Press ^B to get the MP Login:


The default user name and password will be Admin/Admin.

Regards,
Syam