HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP PDC How to find out?

 
SOLVED
Go to solution
joe_91
Super Advisor

GSP PDC How to find out?

Could someone tell me how to find the current GSP and PDC levels of a N class server? Should i be at the console?

Thanks

Joe
4 REPLIES 4
Steven E. Protter
Exalted Contributor

Re: GSP PDC How to find out?

To access GSP its usually at the console.

If however you connect the GSP card to the network and use the lc function to set up a valid ip address, it can be accessed via telnet.

To display pdc level:

echo "selclass qualifier cpu;info;wait;infolog" | cstm

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Stf
Esteemed Contributor

Re: GSP PDC How to find out?

Hello,

at the console you can access gsp with ctrl B, and when you start it you can see its level.

For the pdc you can access it at boot by pressing any keys when it says "press any key within 10 sec to interrupt" and at the main menu if you type "in fv" you can see firmware version of pdc.

Stf ;-)
Ivajlo Yanakiev
Respected Contributor

Re: GSP PDC How to find out?

You can find GSP FW rev
on gsp prompt
GSP>HELP

look on top

Robert-Jan Goossens
Honored Contributor
Solution

Re: GSP PDC How to find out?

# grep PDC /var/tombstones/ts99

Regards,
Robert-Jan