GSP Problem

[Franky_1]

When i'm trying to login to the server's console using telnet and login as root the MP> prompt occurs. Then i type in co and then ^ecf. Then the message "bumped user - root" shows up, but nothing else happens. I don't have a chance to type in any more commands.
Any suggestions would be greatly appreciated
Thx in advance

Regards

Franky

[Torsten.]

Hi Franky,

what server model is it?

Just in case your console setting is VGA instead of serial line, you won't have the console accessible from the MP at all.

[Franky_1]

Model is RP3440

[Torsten.]

This system has always the console accessible from the MP.

I would try to logon to the system directly and check if any application is already using (and maybe hung) the console connection.

[Franky_1]

The problem seems to be that the server itself isn't running correctly - therefore i've tried to access it via GSP. Is there any way to fix this problem or do we need to reinstall it?

[Torsten.]

Under certain circumstances the server itself will detect a hung OS and will do a reset to resolve this situation.

Anyway, if the system is not responding at all, you will most likely see no response on the console also.

As a last resort you may consider to reset the server from the MP (rs command) and reboot.

[sreekanthtm]

Hi,

After the msg " Bumped user - root" Try [Ctrl + C] option OR [ctrl + \].
Are you able to see MP logs? If so try CL and see the last cosole o/p.

Rgds
Sreekanth

[Joelmel Roche]

try to grep sh and check if there are other running in console.

ps -ef |grep sh