HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP error: System Bus Adapter Function Failure

 
SOLVED
Go to solution
Jan Shu
Regular Advisor

GSP error: System Bus Adapter Function Failure

Hi All,
I have a HP9000 L-2000 server with 11i OS. Sometimes when I reboot this server, it got FAULT and ALERT lights blinking in the front panel. Also there were error logs in GSP. Please find attached screenshot. How to fix it? After the reboot completed, the server syslog.log didn't have similar error.

Please help. Thanks.

Best Regards,
Jan
4 REPLIES 4
erics_1
Honored Contributor
Solution

Re: GSP error: System Bus Adapter Function Failure

Jan,

How was the system rebooted? Was it a graceful shutdown or power cycle/reset?

The fault light will continue to blink on the front panel until you view the GSP logs with the SL command.

If this was a graceful shutdown, you may want to tail OLDsyslog.log although I suspect there won't be any useful information there. You may want to take a look at the ts99 and check for valid timestamps. This may indicate a problem that HW support would need to look at further.

Best Regards,
Eric
Uday_S_Ankolekar
Honored Contributor

Re: GSP error: System Bus Adapter Function Failure

Looks like system detects HPMC ..
Refer this doc..
http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000076283020


-USA..
Good Luck..
樊华
Occasional Visitor

Re: GSP error: System Bus Adapter Function Failure

Uday

Thanks for your link!!
Jan Shu
Regular Advisor

Re: GSP error: System Bus Adapter Function Failure

I replaced a HBA card and the problem was fixed. Thank you.