HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP not displaying ability to change term type in ca command

 
SOLVED
Go to solution
Randy Hagedorn
Regular Advisor

GSP not displaying ability to change term type in ca command

Hi all,
I have read many threads about the ability to change the terminal type in the GSP on an N4000. I have been trying with no success to do so on our system. I have hit return at the login prompts with no luck and even created a user with Administrator access level with no luck.

All I am able to change is the baud rate and the flow control, no term type.

Does anyone have any suggestions or am I just clueless?

Thanks,
Randy
1 REPLY 1
Robert-Jan Goossens
Honored Contributor
Solution

Re: GSP not displaying ability to change term type in ca command

Hi Randy,

Check if you can open this doc.

Document description: How to set hpterm on A-series, L-series and N-series servers
Document id: pamAC200109061

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000075965062

US
http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000075965062

Hope this helps,
Robert-Jan