HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP reset on an L2000 without power cycling ?

 
SOLVED
Go to solution

GSP reset on an L2000 without power cycling ?

Hi,
Is it possible to remove the previously set usename/password/LAN config on a GSP card on a L2000 without taking it down?
Would be handy :-)
Damian
4 REPLIES 4
Dave Hutton
Honored Contributor

Re: GSP reset on an L2000 without power cycling ?

Taking the server down? or jus the GSP?
You can change those settings without effecting the server OS.

The GSP is independant of the OS.
Robert-Jan Goossens
Honored Contributor
Solution

Re: GSP reset on an L2000 without power cycling ?

Hi Damian,

if you run the command

# stty +resetGSP < /dev/GSPdiag1

from the console, a message like

"press 'p' within 5 sec to reset all user accounts" will come up.

Best regards,
Robert-Jan

Re: GSP reset on an L2000 without power cycling ?

Thanks Robert-Jan,

That worked a treat. And a better reponse time than the Open Source forums (and they're pretty good).

Much Appreciated.

Damian
Devender Khatana
Honored Contributor

Re: GSP reset on an L2000 without power cycling ?

Hi Damian,

Apart from soft reset of GSP you can also do a hard reset of GSP card without recycling power to machine. This is required only if the output from soft reset command throws a output 'GSP Reset Failed'. This is done by pushing a push button that in physically visible on the GSP card after physically opening the cabinet.

HTH,
Devender
Impossible itself mentions "I m possible"