cancel
Showing results for 
Search instead for 
Did you mean: 

GSP

 
aruns_s
Frequent Advisor

GSP

Hi Gurus,
I was accessing GSP on an N class system. I hv type SE wrongly.. NOw console is hung.. it is taking me inside GSP but I can't execute any commands.. All I am getting is blank screen,I believe it is trying to run SE.Would u please guide me how I can come out of SE window..
I am not able to access system as it has got some I/o issue,not allowing my kernel to boot
4 REPLIES 4
Senthil Kumar .A_1
Honored Contributor

Re: GSP

Press "Ctrl+b"

SK
Let your effort be such, the very words to define it, by a layman - would sound like a "POETRY" ;)
aruns_s
Frequent Advisor

Re: GSP

no luck with ctrl+b
Andrew Young_2
Honored Contributor

Re: GSP

As a lst resort you may need to reset your GSP.

There is a GSP reset button on the back of the unit located on the CORE IO board. On the N4000 it is between the lan0 RJ45 connector and the HDVDI SCSI connector. On the rp7400 it is to the left of the lan0 RJ45 connector.

It should not affect the normal operation of your server.

Regards

Andrew Y

Si hoc legere scis, nimis eruditionis habes
Torsten.
Acclaimed Contributor

Re: GSP

Sounds like the server is down.

If there is no OS running, simply pull the power plugs, wait a minute and plug in again.

Just another way to reset the GSP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!