HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Guardian Service Processor n4000

 
SOLVED
Go to solution
nibble
Super Advisor

Guardian Service Processor n4000

guys, may i ask for the basic commands of the guardian service processor of an Nclass 4000?

i bet that to get to its console its, Ctrl+b, may i know how to get the help manual for this? i tried ?, help..but to no avail...

my systems ATTN light it blinking and i need to know whats wrong.the previous sys ad jes left the Ctrl+B command..nothing more.. =(

or..may i ask of where can i get the docs for this..

thanks in advance...
6 REPLIES 6
Denver Osborn
Honored Contributor
Solution

Re: Guardian Service Processor n4000

When you are at the GSP prompt, type HE for a list of commands. You'll need to view the even log to get the attn light to turn off. The SL command will pull up the logs. After running SL, choose 'E' for the event logs.

The CO command will take you from GSP mode back to the console.

hope this helps,
-denver
nibble
Super Advisor

Re: Guardian Service Processor n4000

thanks osb... it did help...can you recommend any links for docu's of this one?
S.K. Chan
Honored Contributor

Re: Guardian Service Processor n4000

T G Manikandan
Honored Contributor

Re: Guardian Service Processor n4000

T G Manikandan
Honored Contributor

Re: Guardian Service Processor n4000

nibble
Super Advisor

Re: Guardian Service Processor n4000

thanks all!