HBA

[tze chuan]

Who can i optain the model of HBA that support the HP9000 servers which is non PCI base?
and the HP-UX version that is supported for those cards?

[Nick Wickens]

Hi There

Have a look at this link -

http://techsolutions.hp.com/scsi/scsihome.html

[tze chuan]

Thanks for the reply, sorry that i did not specify clearly I was actually looking for the fc HBA, where the link did help me to go to the fc home page.
http://www.techsolutions.hp.com/fc/fchome.htm
For those servers which are listed as non-supported in the support matrix, wonder did anyone plug in any fc hba to make them connected to the SAN?
again, thanks for the feed back.

[Nick Wickens]

What system are you trying to connect up and to what ?

P.S Best method of thanks on the forums is to assign points from the little drop down box that appears near to the reply.

[harry d brown jr]

NON-PCI?? Is this for a K-class server??

have you tried:

http://partsurfer.hp.com

live free or die
harry

[Edgardo M. Yumul]

What is the product number of HBA you're trying to install? and what server?

[Vincent Farrugia]

Hello,

HP-HSC Fibre Channel cards:

For T600 server: A3636A
For K-Class series servers: A3404A
For D-Class series servers: A3591A

HP-PB Fibre Channel card:

For NOVA series and Pre-NOVA series (807S-897S, F, G, H, I): 28615A

HTH,
Vince

[Patrick Wessel]

Vince,
I'm afraid that 28615A isn't a FC interface. It's fibre link, an old and complete different protocol

[Vincent Farrugia]

Thanks Patrick. Sorry Tze.

[tze chuan]

Base on the matrix that i found, i got most HBAs for the servers, but there is no FC HBA for T500 servers. How can I cannot the T500 to SAN? upgrade the T500 to T600?