HBA

 
SOLVED
Go to solution
tze chuan
Occasional Contributor

HBA

Who can i optain the model of HBA that support the HP9000 servers which is non PCI base?
and the HP-UX version that is supported for those cards?
11 REPLIES 11
Nick Wickens
Respected Contributor

Re: HBA

Hi There

Have a look at this link -

http://techsolutions.hp.com/scsi/scsihome.html
Hats ? We don't need no stinkin' hats !!
tze chuan
Occasional Contributor

Re: HBA

Thanks for the reply, sorry that i did not specify clearly I was actually looking for the fc HBA, where the link did help me to go to the fc home page.
http://www.techsolutions.hp.com/fc/fchome.htm
For those servers which are listed as non-supported in the support matrix, wonder did anyone plug in any fc hba to make them connected to the SAN?
again, thanks for the feed back.
Nick Wickens
Respected Contributor

Re: HBA

What system are you trying to connect up and to what ?

P.S Best method of thanks on the forums is to assign points from the little drop down box that appears near to the reply.
Hats ? We don't need no stinkin' hats !!
harry d brown jr
Honored Contributor

Re: HBA


NON-PCI?? Is this for a K-class server??

have you tried:

http://partsurfer.hp.com

live free or die
harry
Live Free or Die

Re: HBA

What is the product number of HBA you're trying to install? and what server?
Vincent Farrugia
Honored Contributor

Re: HBA

Hello,

HP-HSC Fibre Channel cards:

For T600 server: A3636A
For K-Class series servers: A3404A
For D-Class series servers: A3591A

HP-PB Fibre Channel card:

For NOVA series and Pre-NOVA series (807S-897S, F, G, H, I): 28615A

HTH,
Vince
Tape Drives RULE!!!
Patrick Wessel
Honored Contributor

Re: HBA

Vince,
I'm afraid that 28615A isn't a FC interface. It's fibre link, an old and complete different protocol
There is no good troubleshooting with bad data
Vincent Farrugia
Honored Contributor

Re: HBA

Thanks Patrick. Sorry Tze.
Tape Drives RULE!!!
tze chuan
Occasional Contributor

Re: HBA

Base on the matrix that i found, i got most HBAs for the servers, but there is no FC HBA for T500 servers. How can I cannot the T500 to SAN? upgrade the T500 to T600?