HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HDS 9200 Tunder with HPUX 11.00

 
nelan
Occasional Visitor

HDS 9200 Tunder with HPUX 11.00

Hi guys,

Im running a hpux 11.00 on a n class.Currently there are 4 A3740A cards attached to the EMC.Now i add another 4 A5158A 11.00.06 to the n class and connect it to the HDS 9200 thunder.The problem is:-
i can't see any of the hitachi disk.
Can hds 9200 run on 11.00
is there a patch/firmware which required?

need assistance ASAP..

thx in advance

raj
1 REPLY 1
Sameer_Nirmal
Honored Contributor

Re: HDS 9200 Tunder with HPUX 11.00

Hi,

Verify the A5158A HBA installation using following document and check for the patches required mentioned in it.

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000080078238