HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 D class

 
SOLVED
Go to solution
Sajjad Shafi
Advisor

HP 9000 D class

i have old hp box. Not connected in the network. How can i connect to HP box using my laptop.

Thanks
6 REPLIES 6
Steven E. Protter
Exalted Contributor

Re: HP 9000 D class

Shalom,

You can connect a null modem cable from the serial of the laptop to the console of the system. Then use hypertermianl to connect. You may need a usb to serial adapter to make this work.

You could also connect the D box to a network.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Jaime Bolanos Rojas.
Honored Contributor

Re: HP 9000 D class

Saijad,

For more information regarding this topic, take a look at this thread,

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1049362

Regards,

Jaime.
Work hard when the need comes out.
DCE
Honored Contributor

Re: HP 9000 D class



If you want to connect directly to the D class box
disconnect the monitor from the system
connect a null modom cable between your laptop and the d class system console port (the monitor port)

If you want to connect it to the network, and there is a working monitor (and network connection), simply bring the box up and run the set_parms to configure the system

If you want to connect to a network and there is no monitor, perform the steps listed above sequencially.
GBR
Regular Advisor
Solution

Re: HP 9000 D class

I use a 9 Pin Serial cable to connect my laptop to my D Class server.

I also use Windows XP HyperTerminal to set up a terminal.
1. Emulation = VT100
2. Baud rate = 9600 (Bits per second)
3. Data bits 8
4. Parity = None
5. Stop bits = 1
6. Flow Control = None

Hope this helps,
GBR
Sajjad Shafi
Advisor

Re: HP 9000 D class

thanks all. Used a 9 pin null cable . Used hyper terminal. And able to connect to the machine.
Sajjad Shafi
Advisor

Re: HP 9000 D class

Issue is resloved using 9 pin null cable,hyper terminal and proper set up of baud rate