HP 9000 G60 startup error codes

[Andy Westlake]

Hello,

I have an old G60 that I am trying to startup problem is that it hangs on startup with an error code FLT 707C and unfortunately I do not have the manuals. So any ideas what wrong please?

Andy.

[Paul Gold_2 · Accepted solution]

Andy

I believe this is a Memory fault, usually memory in wrong order

try reseating the Memory cards and SIMMS

Paul Gold

[Andy Westlake]

Paul,

Thanks for that, seems to be the memory.
Any idea of the memory configuration rules for that machine please?

Andy.

[George_Dodds]

Hi Andy, this link may help

http://bizforums.itrc.hp.com/cm/QuestionAnswer/0,,0x183749c5ae73d4118fef0090279cd0f9,00.html


The install order for the memory pairs in a G60 is:
First memory pair into slot 5A/5B
Second memory pair into slot 0A/0B
Third memory pair into slot 4A/4B
Fourth memory pair into slot 1A/1B
Fifth memory pair into slot 3A/3B
Sixth memory pair into slot 2A/2B

Courtesy of Patrick.

Have fun

George

[Andy Westlake]

Paul & George,

Many thanks guys, everything is up and running fine now.

Andy.

[George_Dodds]

No problem, every time i try to help on a post i learn a bit more, saves a fortune on courses!!! :)

Have fun

George