HP 9000 power problem ,,, very urgent

[BAUKnight]

dear all,,,
i used to run my hp 9000 server running hp ux and oracle 9i, it is used for training issues and as a stand by server...
i just moved the server to a new building in our campus, and when i try to poer it up, i hear the voice of the server starting to power just for 2-3 seconds, then it calms down and nothing occures, i checked the cards and i found the following:

the Platform monitor PC board (A5191-69210)
has its heart beat flashing amber,,
and my [Status Panel : Display board - Has on/off switch and five server status LEDs] card (a5191-60013) the switch is moving in its place (maybe this is causing some loose)

any one can offer me a solutioni please...

[Michael Steele_2 · Accepted solution]

Can you provide more information? A5191-69210 works with the entire L and RP class of servers. Can you list the server model? Is the Console connected to a three cord pigtail listed as web, console and UPS? Are all the cables snug and tight into the pigtail? What about the power supplies? Do you have redundent power supplies? Are they snug and tight?

"...heart beat flashing amber..." makes me think you have power but no console connection.

[Michael Steele_2]

Here's a configuration link of consoles:

http://www.docs.hp.com/en/A5191-96022/ch03s03.html#d0e2523

[BAUKnight]

thank u alot, i just connected the console cable and the server works,
thank you again

[BAUKnight]

i just connected the console cable and the server works