HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 superdome wont power on

 
JOHN TURNER_2
Frequent Advisor

HP 9000 superdome wont power on

hello all

we have a hp 9000 sd32 superdome, that will not power on at all, there are no lights on the front or back lcd, and there are no lights on the UGUY board or GSP board, however we do have lights on each of the power supplies, so there is power going to the server, but i cant get the system to power on. From what i have been reading on the internet, there appears to be only 3 SPOF's on the server, both the cables going to the LCD's are in place, i was wondering whether or UGUY board has developed a fault.

can anyone shed any light on the situation

Cheers
John
GUI's are for wimps!
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HP 9000 superdome wont power on

Hi,

first thing to check - can you connect to the GSP? If yes, check the LOG and the "PS" for the current status.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JOHN TURNER_2
Frequent Advisor

Re: HP 9000 superdome wont power on

i cant connect to the GSP, its as if the whole system seems to be dead, turning on the power switch also doesnt appear to do anything.
GUI's are for wimps!
Patrick Wallek
Honored Contributor

Re: HP 9000 superdome wont power on

I would certainly hope that you have a maintenance contract with HP on a SD32. If you do, CALL THEM. That's what you pay all that money for!