HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP E45 console connects with Mux

 
Yan Wong
Frequent Advisor

HP E45 console connects with Mux

Hi Folks,

I have a HP E45 server with MDP mux. I connected it with a HP console before.

Now, this E45 loses any connection with console. I tried to reset the config keys. None of them works. I tried shift key with B, D and reset keys. Restarting the console with pressing the shift key and b key would help.

Any clues?
3 REPLIES 3
Bill Hassell
Honored Contributor

Re: HP E45 console connects with Mux

To reset the HP terminal, turn off the terminal, then while holding the D key down, tun the power back on and release the D key when you see the reset message.


Bill Hassell, sysadmin
Yan Wong
Frequent Advisor

Re: HP E45 console connects with Mux

Tried 3 times, but no luck.

The power light is not turned on. There is no light on the mux port at the back of E server.

SureshKumar_2
Valued Contributor

Re: HP E45 console connects with Mux

Hi

*) If u connect that terminal in different port whether r u getting login prompt???, If u get login prompt, then there is no need to change settings on the terminal.

*) Are u able to connect thru' telent?? Then ur server is up...


+) If u r able to connect, then see in /etc/inittab for /dev/console -> getty entry and also /etc/gettydefs .

-) If possible could u able to give inittab & gettydefs

*) There are some chances that Baud/cable/device faulty.
Things are very easy, when u know about it...