I fire up the server and all that comes up is a bunch of jumbled signs etc. for a lack of better words.... I reset the terminal and still the same issue I haven't a clue what it might be???
If you're using a terminal - hit F5 or F6 - whatever one corresponds to Terminal Settings - it should drop you into a menu - in the lower right hand of the menu toggle down and select VT100 as a terminal setting. Your terminal is likely not set up for the newer systems.
I'm using a 700/92 Terminal I have 3 x rp3440's it work on one but the other two are having this issue it does seem as though they are not set of for this terminal but i'm not sure how to validate that.
the 700/92's are older terminals really and you would be better off in my opinion with a 700/96 if you have one.
that aside, it maybe the setting for the console in the GSP that are conflicting. these have to match the terminal type settings on the terminal itself.
the terminal should be vt100 or similar and set the same in the gsp as well, for example.
if you can change the terminal to vt100, not sure if the 92 has it. or try to get into the gsp and check the setting here. check with the ca command in gsp
I swaped out the MP card for another one and the console came up but now it hangs when I try to log in to console " console live" it hangs.. Not sure why or where to go from here...
