HPE Community
HPE 9000 and HPE e3000 Servers
1752681 Members
5576 Online
108789 Solutions
New Discussion юеВ

Re: HP-UX 10.20 on RP2400 server solution

 
Moreau Jean-Claude
Advisor

тАО10-31-2003 02:32 AM

тАО10-31-2003 02:32 AM

HP-UX 10.20 on RP2400 server solution

Hi all

I would like know if it is possible to install HP-UX 10.20 on a server RP2400.

If it is possible how to install this old version?

Best regards

Jean-Claude
0 Kudos
3 REPLIES 3
Joshua Scott
Honored Contributor

тАО10-31-2003 03:18 AM

тАО10-31-2003 03:18 AM

Re: HP-UX 10.20 on RP2400 server solution

No. 11.0 was the earliest HPUX release supported on the newer PA-RISC CPUs. any of the 'rp' series, or the N, L, class and A400/500 can only run a 64-bit O/S. 10.20 is 32-bit only.
What are the chances...
0 Kudos
ross martin_2
Advisor

тАО10-31-2003 04:44 AM

тАО10-31-2003 04:44 AM

Re: HP-UX 10.20 on RP2400 server solution

Hi Jean-Claude,

No, it is not possible to run 10.20 on an rp2400 series. The processor type is 64 bit and loading 10.20 will give you peculiar errors.

Here is the official HP website on the rp2400 specifications:
http://www.hp.com/products1/servers/rackoptimized/rp2400/specifications.html

Hope this helps,

Ross
Retired HP
0 Kudos
Jeff Schussele
Honored Contributor

тАО10-31-2003 05:16 AM

тАО10-31-2003 05:16 AM

Re: HP-UX 10.20 on RP2400 server solution

Hi Jean-Claude,

Sorry, the rp2400 must run a 64-bit OS & 10.20 is a 32-bit OS.

Rgds,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.