HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX 11.11 install on a HP9000 RP3410

 
Biker007
Advisor

HP-UX 11.11 install on a HP9000 RP3410

As the RP3410 is a special server which cannot be directly connected to a monitor before installing an OS, I need some help with the Management Processor (MP) Console to install HP-UX 11.11.
Thanks

(Any procedure document would be appreciated ;o))
4 REPLIES 4
Luk Vandenbussche
Honored Contributor

Re: HP-UX 11.11 install on a HP9000 RP3410

Hi you find a label with the MAC adress of the MP an the server.
Send a Ip adres with ARP

arp -s IP MAC
telnet Ip

You can change the network settings with the command LC in CM
Luk Vandenbussche
Honored Contributor

Re: HP-UX 11.11 install on a HP9000 RP3410

See also starting from p. 80 in this pdf

http://www.docs.hp.com/en/A7137-96001-en/A7137-96001-en.pdf
Lee Harris_5
Valued Contributor

Re: HP-UX 11.11 install on a HP9000 RP3410

You can connect this server upto a dumb terminal, or even a laptop running something like HyperTerminal. There's a big MP Console port on the rear. Just stick a W-splitter onto it (the one with Console, Remote, UPS) and hook up to the Console 9-pin serial connect.

9600bps, 8 N 1.

Jobs a good-un!
Biker007
Advisor

Re: HP-UX 11.11 install on a HP9000 RP3410

Thanks to all

I used those documents:
Selecting Your HP-UX Console
http://docs.hp.com/en/5990-6728/ch04s03.html

Management Processor (MP)
http://docs.hp.com/en/AB331-90005-en/ch04s03.html

Booting HP Workstations and Servers
http://docs.hp.com/en/5990-6721/apc.html

Boot Console Handler (BCH) System Boot Environment http://docs.hp.com/en/A5201-90017/apcs01.html