HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP management processor

 
Juquin_3
Advisor

HP management processor

Hi ,

How to connect on HP management Processor ? Do i reboot the server or not ? How to get event logs (errors logs) ?
How to return to tho prompt login ?

Thanks for your help ,

5 REPLIES 5
Luk Vandenbussche
Honored Contributor

Re: HP management processor

Steven E. Protter
Exalted Contributor

Re: HP management processor

Shalom,

From the console, ctrl-b to connect to the GSP/management processor.

Depending on model type, you may be able to connect an RJ45 cable and configure it with a network ip address to allow for network based management.

Don't forget to change the default password.

No reboot required.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Pete Randall
Outstanding Contributor

Re: HP management processor

And use "co" from the gsp/mp menu to return to console mode.


Pete

Pete
Juquin_3
Advisor

Re: HP management processor

Thank you !
Andrew Rutter
Honored Contributor

Re: HP management processor

hi,

to read the logs in the MP

login as mentioned

type sl
sl
type e for error
e
type n not to set up a filter
n

depending upon server, but usually something like this to read the error logs for example

Andy