HP rp3410 CPU gets deconfigured

[Montu_1]

Hi ALL,

In last 5 month i got following errors twice !
If i reconfigure cpu and reboot it works fine?

Log Entry 124: 08 Apr 2006 08:30:40
Alert Level 3: Warning
Keyword: BOOT_BOOT_ABDICATION
A failed monarch CPU is being deconfigured.
Logged by: System Firmware 1
Data: Data field unused
0x6080081F01E00880 0000000000000000


at boot prompt it shows following
----
0 0xfffffffffe780000 Deconfigured, flagged to be reconfigured

1 0xfffffffffe781000 Configured, not flagged to be deconfigured


any idea why this happening ?

[Sameer_Nirmal]

Hi Montu,

Can you post the FPL ( forward progress log ) MP -> SL -> FP?
MP -> CM -> ID
MP -> CM -> SS
MP -> CM -> SYSREV
MP -> CM -> DF

It might be a case that CPU 0 is malfuncationing.

[Peter Godron · Accepted solution]

Montu,
have you had a look at:
http://docs.hp.com/en/diag/ems/dm_chassis.htm

See Event 1028:

Cause:
Defective CPU.
Action:
Contact HP Support Personnel to troubleshoot the cell board.

[Montu_1]

Hello Sameer,

I have attached required output,

[Sameer_Nirmal]

Montu,

I don't see required FPL in the attachment.

I presume that you do shutdown/boot the server. Sometime with this, you see such event and error during boot right?
OR
Was there any system reset/reboot from running OS environment during those 2 occessions?

Just figuring out the scenario.. ??

[Andrew Merritt_2]

Was there anything logged in /var/opt/resmon/log/event.log ? I'd expect to see at least one message from dm_chassis from when the CPU was first deconfigured, assuming you have a recent version of OnlineDiags running.

Andrew

[Montu_1]

Sameer,

I had seen this message while system rebooted ( both the times).

Andrew,
in event.log nothin found like dm_chasis.

******
Today HP Support Centre has checked system with offline diagnostic tool, he found everything ok.

[Montu_1]

Thanks ALL,
Montu