HP rp3440 - Video Display

[walter crasto_1]

Hi,

I have the HP900 Server rp3440 but it seems the on bord Viedo card id disable & it requires the extra viedo card to connect dispaly or else I have to live with the serial port & Hyper terminal.

Is there any way to enable the on bord display ? or else let me know the PCI Video card which can work on this machine.

Thanks in Advance

Regards
Walter

[Steven E. Protter]

This server will only work with certain kinds of video cards.

If the card is listed as valid in http://partsurfer.hp.com and in the right pci slot it should be claimed and usable at boot time right after install.

SEP

[Sunil Sharma_1]

Walter,

Default configuration of HP 9000 server does not contain Video Card. There is no HP 9000 server has on board Video adapter.You can use X-windows on you PC to get Graphical interface. Exceed is well knows product for this.
You can install additional Video card if required: correct part number can be find out from http://partsurfer.hp.com

Sunil

[Sunil Sharma_1]

part number for Graphics card is A6150-60003
Sunil

[Luk Vandenbussche]

The rp3440 and rx2600 have the same chassis.
The onboard video only works on the rx2600 with W2K3 and Linux

[Zygmunt Krawczyk]

rp3440 has VGA controller (Radeon 7000) on MP board, but this controller is not active. If you want to have graphics in this machine, you should buy A6150B bundle (2D PCI graphic card set- consists of one graphics card and one 2 port USB cardGraphics card). You need to install only graphic card (not USB card).

Regards,
Zygmunt