HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP webconsole

 
SOLVED
Go to solution
li_18
Occasional Advisor

HP webconsole

How to configure the HP webconsole?
Many thanks!
8 REPLIES 8
Ranjith_5
Honored Contributor

Re: HP webconsole

Hi,

Pls see the attachment .
Hope this will clear all your doubts.


Syam
Steven E. Protter
Exalted Contributor

Re: HP webconsole

The HP webconsole has a default IP address programmed into it. Basically, you connect the device to a network, use a web browser to connect to this default IP address and configure the via a very simple menu system.

You do need to get an ip address from your network administrator before you start.

Some docs
http://search.hp.com/redirect.html?url=http%3A//forums1.itrc.hp.com/service/forums/questionanswer.do%3FthreadId%3D94221&qt=hp+%2Bweb+%2Bconsole&hit=11
http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5191-96022/A5191-96022_top.html&con=/hpux/onlinedocs/A5191-96022/00/00/20-con.html&toc=/hpux/onlinedocs/A5191-96022/00/00/20-toc.html&searchterms=web%7cconsole%7chp&queryid=20041110-201759

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
YoungHwan, Ko
Valued Contributor
Solution

Re: HP webconsole

1. Press ctrl+b Key
2. GSP Login.
If you not set the ID and Password.
Default is Enter.
Press Enter twice.
3. GSP> lc
==> From here you can setting the Lan Concole interactively.

After set Lan console, confirm your setting using 'lc'
4. GSP> lc
If all setting are correct press enter three times.
5. GSP> co
Go to console mode.


6. telnet "LanConsole IP"

7. Press ctrl+Ecf to obtain written right.

li_18
Occasional Advisor

Re: HP webconsole

What is "ctrl+Ecf "
Thanks!
Ivajlo Yanakiev
Respected Contributor

Re: HP webconsole

CTRL+E fc is key CONSECUTIVE that you must enter if you want ot get write access to the GSP.