HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP9000/800/H70 console and bootstrap

 
SOLVED
Go to solution
Jay_174
Occasional Contributor

HP9000/800/H70 console and bootstrap

I've just acquired an H70 system and I'm attempting to boot with some problems.

It is running HPUX-11.0, the console is a 700/60 and I believe it is connected to a SCSI/PARALLEL/APMUX card (terminal is connected to port 0 on an external 8 port mux that connects to the card via db9 connector).

First, it appears that the status line information is not being put on the status line but scrolls the screen like normal text.

I am receiving a large number of errors when I power up:
TEST 3000 Remote locked inactive multiple access fault 002D79L
TEST 10D1 <
TEST 10D2 <
TEST 2090 <- same Remote & access information
TEST 2091 <
INIT C200 <

A new line will display every few seconds and usually alternates between TEST 20xx.... and INIT C2xx....

I can type HE and get the NIO16 Access Menu
Is that part of GSD? I can't find any information about it.

I am able to issue commands (such as UR to unlock remote) but I'm not able to get past this menu. Any help?

Thanks!
Jay
4 REPLIES 4
Sunil Sharma_1
Honored Contributor

Re: HP9000/800/H70 console and bootstrap

type co and enter to get console access.

Sunil
*** Dream as if you'll live forever. Live as if you'll die today ***
Jay_174
Occasional Contributor

Re: HP9000/800/H70 console and bootstrap

OK I'll try that, I think I did before but I'll give it another shot. Any way to find out what the test and init codes mean?

Thanks!
Jay
Peter Godron
Honored Contributor
Solution

Re: HP9000/800/H70 console and bootstrap

Jay_174
Occasional Contributor

Re: HP9000/800/H70 console and bootstrap

Thanks Peter, that's just what I was looking for!
Jay