HPE 9000 and HPE e3000 Servers
1748011 Members
4649 Online
108757 Solutions
New Discussion юеВ

Re: HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

 
SOLVED
Go to solution
LG Porter
Frequent Advisor

HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

I have a L2000 Series B server running HPUX 11.0. Recently I had a problem that required the access to the console in order to resolve a boot up problem. A) Is there a way I can view the console logs, PDC logs and the GSP logs? B) That is, if I get to the console and execute 'Control B', what logs can be viewed? C) Is there any documentation available that outlines what can be performed at the CL> prompt?
5 REPLIES 5
Ken Hubnik_2
Honored Contributor
Solution

Re: HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

You can always type HE for help at any prompt for an explanation and all the commands. SL show logs prompts you for what logs you would like to view.
Uday_S_Ankolekar
Honored Contributor

Re: HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

To get GSP login use CTRL+B , Yoy can see logs by SL (Show logs) The logs you can view are Incoming , Activity, Error, Current boot and Last boot.
As Ken mentioned use HE to get help and LI will give list of commands for GSP

-USA..
Good Luck..
Michael Steele_2
Honored Contributor

Re: HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

Here's a WORD doc with the GSP command set. 'SL' for show logs.

Note the Alert Level messages and their numbers. In general, 12 and above indicate a HW call is needed while 11 and below do not.
Support Fatherhood - Stop Family Law
Eugeny Brychkov
Honored Contributor

Re: HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

Two more very useful commands are:
SS (system state)
PS (power state)
Eugeny
Zigor Buruaga
Esteemed Contributor

Re: HPUX 11.: Viewing Console Logs, GSP Logs, CL Prompt

Hi,

Take a look at this link:
http://web.tampabay.rr.com/batcave/GSPinfo.htm

Maybe you could find it useful.
Kind regards,
Zigor