HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Help! My rp5470 don't start

 
Yuri Fomin
Advisor

Help! My rp5470 don't start

Hello!

Please help me in my situation.
I use command icod_modify -a 4 on my rp5470 server with 3 active CPU and iCOD.

iCOD tell me that i have no license for this.

After that i reboot server and recive next messages:


alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x7fa00000.

************* SYSTEM ALERT **************
SYSTEM NAME: croc-gsp
DATE: 01/24/2004 TIME: 09:16:41
ALERT LEVEL: 12 = Software failure

REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code
0x58E008C01100B800 00006800 18091029 - type 11 = Timestamp 01/24/2004 09:16:41
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry

************* SYSTEM ALERT **************
SYSTEM NAME: croc-gsp
DATE: 01/24/2004 TIME: 09:16:41
ALERT LEVEL: 12 = Software failure

REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0xA0E000C01100B000 00000000 000005E9 - type 20 = major change in system state
0x58E008C01100B000 00006800 18091029 - type 11 = Timestamp 01/24/2004 09:16:41
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry

************* SYSTEM ALERT **************
SYSTEM NAME: croc-gsp
DATE: 01/24/2004 TIME: 09:16:52
ALERT LEVEL: 3 = System blocked waiting for operator input

REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0xF8E000301100E000 00000000 0000E000 - type 31 = legacy PA HEX chassis-code
0x58E008301100E000 00006800 18091034 - type 11 = Timestamp 01/24/2004 09:16:52
A: ack read of this entry - X: Disable all future alert messages

************* SYSTEM ALERT **************
SYSTEM NAME: croc-gsp
DATE: 01/24/2004 TIME: 09:16:54
ALERT LEVEL: 3 = System blocked waiting for operator input

REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0xF8E000301100EFFF 00000000 0000EFFF - type 31 = legacy PA HEX chassis-code
0x58E008301100EFFF 00006800 18091036 - type 11 = Timestamp 01/24/2004 09:16:54

Server can't start now.

We apply PDC patch PHSS_28608 some days ago and last attempts to reboot were successeful, but today we have unbootable server.

Please, could anyone help us?
2 REPLIES 2
Pedro Rubio
Advisor

Re: Help! My rp5470 don't start

Hi Juri,

Did you resolve your problem?.

That kind of Event Log indicates a panic so first attempt should be to boot on maintenance mode (-lm).

Of course, panics just after "alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x7fa00000." message could be due to a pci card bad seated or defective.

Let me know.

Regards,
Pedro.
Tobias Hartlieb
Trusted Contributor

Re: Help! My rp5470 don't start

Hi,
it appears that the problems started when you used the iCOD Commands...
what about deconfiguring the 4th CPU in Main Menu (=>Configuration Menu => CPU 3 off (you start to count from 0 for CPUs!), 'RESET' system..)
Also, if you go from 'main menu' to 'service menu' and type 'pim 0 hpmc', is there a recent timestamp (e.g. HPMC occured?)
....did you try to boot from prev. Kernel?

Regards.

Tobias