HPE 9000 and HPE e3000 Servers
1748092 Members
6000 Online
108758 Solutions
New Discussion юеВ

Re: How do you change the GSP Passwd

 
Robert DJ
Frequent Advisor

How do you change the GSP Passwd

Hi .

How do we change the GSP Passwd (for Admin).

Thank you.

Regards,
Robs.
Robert DJ
6 REPLIES 6
RAC_1
Honored Contributor

Re: How do you change the GSP Passwd

Check SO command on GSP
There is no substitute to HARDWORK
Robert DJ
Frequent Advisor

Re: How do you change the GSP Passwd

Hi RAC,

Wasnt able to change the password.

Thank you.

Regards,
Robs
Robert DJ
Luk Vandenbussche
Honored Contributor

Re: How do you change the GSP Passwd

Hi,

In GSP,

Choose the following options


CM
UC
C
1
P

Now you can change the password
Cem Tugrul
Esteemed Contributor

Re: How do you change the GSP Passwd

Robert,
Here is an example from my superdome GSP

First select CM(command menu)
then go
SO : Configure Security Options and Access Control
GSP:CM> so

1. GSP wide parameters
2. User parameters
Which do you wish to modify? ([1]/2)
Then;select 2
Current users:

LOGIN USER NAME ACCESS PART. STATUS

1 Oper Operator Operator
2 admin admin Admin
3 cemt cemt Admin Disabled

1 to 3 to edit, A to add, D to delete, Q to quit :

Good Luck,

Our greatest duty in this life is to help others. And please, if you can't
Cem Tugrul
Esteemed Contributor

Re: How do you change the GSP Passwd

Go on with the option 3 so Let's see what happens

1 to 3 to edit, A to add, D to delete, Q to quit : 3

Current User parameters are:
Login : cemt
Name : cemt
Organization : MAN TURKIYE A.S
Access Level : Administrator
Mode : Single Use
State : Disabled
Default Partition :
Dialback : (disabled)

Enter Login [cemt] :

Enter Name [cemt] :

Enter Organization [MAN TURKIYE A.S] :

Valid Access Levels: Administrator, Operator, Single Partition User
Enter Access Level ([A]/O/S) : A

Valid Modes: Single Use, Multiple Use
Enter Mode ([S]/M) : S

Valid States: Disabled, Enabled
Enter State ([D]/E) : E

Enable Dialback ? (Y/[N]) n

Enter Password [unchanged] :
Re-Enter Password :
New User parameters are:
Login : cemt
Name : cemt
Organization : MAN TURKIYE A.S
Access Level : Administrator
Mode : Single Use
State : Enabled
Default Partition :
Dialback : (disabled)

Changes do not take affect until the command has finished.
Save changes to user number 3? (Y/[N]) Y

that's it...

Good Luck,
Our greatest duty in this life is to help others. And please, if you can't
Robert DJ
Frequent Advisor

Re: How do you change the GSP Passwd

It worked and Thank you all for the Valuable info.

Thank you once again.

Regards,
Robs
Robert DJ