HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to access the BCH on a rp5405

 
SOLVED
Go to solution
Jørgen Rasmussen_2
Occasional Contributor

How to access the BCH on a rp5405

Hi

How do I gain access to the Boot Console Handler on a rp5405? I'm trying to check/change the scsi rate on the internal controller. Is it possible to check the rate without rebooting the server?

Regards
Jorgen Rasmussen
Copenhagen Business School
3 REPLIES 3
Slawomir Gora
Honored Contributor
Solution

Re: How to access the BCH on a rp5405

Hi,

you have to:
1. reboot server
2. interrupt booting process when you see:
"To discontinue, press any key within 10 seconds"
3. enter into service menu: ser
4. to check run: scsi

Zygmunt Krawczyk
Honored Contributor

Re: How to access the BCH on a rp5405

Hi,

Boot Console Handler is available on console only. You can use local terminal via serial cable or LAN console (telnet).
See the doc:
http://www.docs.hp.com/hpux/pdf/A5191-96022.pdf
page 51+

Regards,
Zygmunt
Jørgen Rasmussen_2
Occasional Contributor

Re: How to access the BCH on a rp5405

The problem has been solved as per the replys.