HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to attach a modem to J3830, attached to the fan-out cable of PCI MUX 8-port adapter, in RP 3410

 
nikfirst
Occasional Visitor

How to attach a modem to J3830, attached to the fan-out cable of PCI MUX 8-port adapter, in RP 3410

What is the right way ( adapters, convertors and configuring ) to connect a standard serial device - modem to the fan-out cable of the PCI MUX 8-port adapter in RP 3410, running HP-UX 11v2? ( I have the convertor J3830A, attached to the fan-out cable )
I could not find a manufactured convertor/adapter for the propriety HP DB25 female end of J3830 to standard RS232 DB25 of modems. I have tried rewiring according to the schema on the MUX adapter`s manual in vain. Also three different modems(Acorp, U.S. Robotics..). Peripferal devices configured via SAM. /etc/uucp/Devices is edited...
I will appreciate a step-by-step solution or any suggestions.
Thank you in advance!
1 REPLY 1
marie-noelle jeanson_1
Trusted Contributor

Re: How to attach a modem to J3830, attached to the fan-out cable of PCI MUX 8-port adapter, in RP 3410

Hi,

Not sure if this will help, but it may give you some ideas:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=74256

Marie-Noelle