How to change IP of GSP on L-class rp5430

[Gary_O]

What are the steps neded to change the IP address of the GSP interface?

[A. Clay Stephenson]

This will tell you everything you need to know. Since you didn't bother to explain whether you wanted to do it via the LAN or from the terminal console (ASCII), I wasn't inclined to outline both methods.

http://docs.hp.com/en/A5191-96018/index.html

[Geoff Wild]

First, you need to be on the system console, issue a ctrl b

Then use the lc command to set the ip.

Some info here:

http://docs.hp.com/en/A5191-96022/ch03s03.html

Rgds...Geoff

[Geoff Wild]

BTW, please check out:

http://forums1.itrc.hp.com/service/forums/helptips.do?#28

http://forums1.itrc.hp.com/service/forums/pageList.do?userId=CA56028&listType=unassigned&forumId=1

Thanks....Geoff

[Asif Sharif]

Hi Ling Ho,

1.Login in into console with Admin/passwd(Admin)
2.GSP>CM>LC
3.after that change the IP address and other info e.g. GW,Mask etc.
4. Reset GSP using XD command.

Regards,

Asif Sharif