HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change IP of GSP on L-class rp5430

 
Gary_O
Frequent Advisor

How to change IP of GSP on L-class rp5430

What are the steps neded to change the IP address of the GSP interface?
4 REPLIES 4
A. Clay Stephenson
Acclaimed Contributor

Re: How to change IP of GSP on L-class rp5430

This will tell you everything you need to know. Since you didn't bother to explain whether you wanted to do it via the LAN or from the terminal console (ASCII), I wasn't inclined to outline both methods.

http://docs.hp.com/en/A5191-96018/index.html
If it ain't broke, I can fix that.
Geoff Wild
Honored Contributor

Re: How to change IP of GSP on L-class rp5430

First, you need to be on the system console, issue a ctrl b

Then use the lc command to set the ip.

Some info here:

http://docs.hp.com/en/A5191-96022/ch03s03.html

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Geoff Wild
Honored Contributor

Re: How to change IP of GSP on L-class rp5430

BTW, please check out:

http://forums1.itrc.hp.com/service/forums/helptips.do?#28

http://forums1.itrc.hp.com/service/forums/pageList.do?userId=CA56028&listType=unassigned&forumId=1

Thanks....Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Asif Sharif
Honored Contributor

Re: How to change IP of GSP on L-class rp5430

Hi Ling Ho,

1.Login in into console with Admin/passwd(Admin)
2.GSP>CM>LC
3.after that change the IP address and other info e.g. GW,Mask etc.
4. Reset GSP using XD command.

Regards,

Asif Sharif
Regards,
Asif Sharif