How to check MP revision

[mits]

Hi,

You have the MP firmware version, A.007.002.

FIRMWARE:

Core IO
Master : A.007.002
Event Dict. : 1.012
Slave : A.000.000 - not installed
Event Dict. : 0.000

Same informwation is displayed just after the MP login something like below. In this case, the firmware version is A.7.008.

MP login: Admin
MP password:


Welcome to the

rx7620 Management Processor

(c) Copyright 1995-2004 Hewlett-Packard Co., All Rights Reserved.

Version A.7.008

+++
This is the latest version and is packaged in to the firmware patch PF_COLYEIG0410.

# tar -xvf PF_COLYEIG0410.tar
x cio_2.10.0.osp, 336480 bytes, 658 tape blocks
x eventDic1.15.bin, 458772 bytes, 897 tape blocks
x matcio_2.10.0.osp, 337281 bytes, 659 tape blocks
x mp_A.7.08.0.bin, 8388628 bytes, 16385 tape blocks
x pdhc_1.10.0.osp, 3190017 bytes, 6231 tape blocks
x pdhc_A.3.27.0.bin, 379044 bytes, 741 tape blocks
x rx8620_rx7620_SEU_V4_1_ReleaseNotes.pdf, 105511 bytes, 207 tape blocks
x saving_boot_options.pdf, 2393871 bytes, 4676 tape blocks
x sfw.3.88.0.bin, 10485780 bytes, 20481 tape blocks

[Ah Young]

Hi Mits,

my server does not require log in to MP. Once i press clt b, it straight goes to the MP MAIN MENU as below without showing any version.

Console Login:
- - - - - - - - - - - - Live Console - - - - - - - - - - - -


MP MAIN MENU:

CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Enter OS Session
HE: Main Help Menu
X: Exit Connection

[uninitialized] MP>

[mits]

The system I can access is remote servers. I assume you can get the login prompt once you have quited the MP session by typing "x".

[Rashid Hamid]

sysrev and look at the bottom line

MP:CM> sysrev

FPGA MP
------- -------
Master Core IO : 2.008 4.025
Slave Core IO : 0.000 0.000