HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to check attention LED status ?

 
SOLVED
Go to solution
rveri
Super Advisor

How to check attention LED status ?

Hi All ,

How to check the status of attention LED , on rp7420 server. (from remote login.)

When I goes to VFP it shows only cell joined to partition.

Please help,
Thanks,
5 REPLIES 5
yulianto piyut
Valued Contributor

Re: How to check attention LED status ?

hi rveri,

telnet to MP console, choose SL: Show chassis Logs, (E)rror Log.

-yut-
Torsten.
Acclaimed Contributor
Solution

Re: How to check attention LED status ?

Logon to the MP, run "ps" and select the cabinet "t". This will show you the LED status of the certain components.

If you select the MP itself "g", you will see the status of the front panel LEDs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: How to check attention LED status ?

Example:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: g

HW status for MP : No Fault Detected

Complex model string: 9000/800/rp7410

Attention LED is off
Remote LED is OFF


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Raj D.
Honored Contributor

Re: How to check attention LED status ?

Hi ,
You can check with :

login to Console:
^ B,
MP> CM
MP:CM> PS
choose T for Cabinet : and it will show the status of LED's:



Power Status
---------------+-----+-----+-------+-----+
| | | | |
| Sys | | IO | |
|Bkpln|Cells|Chassis| BPS |
| | 0 1 | 0 1 | 0 1 |
---------------+-----+-----+-------+-----|
Populated | * | * * | * * | * * |
Enabled | * | * * | * * | * * |
Power OK | * | * * | * * | * * |
Warning/Fault | | | | |
Attention LED | | | | |
------------------------------------------


Cheers,
Raj.

" If u think u can , If u think u cannot , - You are always Right . "
Raj D.
Honored Contributor

Re: How to check attention LED status ?

Hi ,
You can check with :

login to Console:
^ B,
MP> CM
MP:CM> PS
choose T for Cabinet : and it will show the status of LED's:

(check the attached file,)


hth,
Raj.
" If u think u can , If u think u cannot , - You are always Right . "