How to dump all SL logs in GSP

[n00body]

I'm achieving all SL logs in GSP to be submitted to HP . But it requires manual input '+ CR' to display all logs . Is there any way that I could dump all logs into the screen and i could capture it via putty logging for instance .

GSP Host Name: test-gsp
GSP> SL


SL

Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) E
E

Set up filter options on this buffer? (Y/[N]) N
N

The first entry is the most recent Chassis Code
Type + CR and CR to go up (back in time),
Type - CR and CR to go down (forward in time),
Type Q/q CR to quit.


Log Entry # 0 :
SYSTEM NAME: test-gsp
DATE: 08/08/2009 TIME: 22:12:36
ALERT LEVEL: 5 = Boot possible, environmental problem exists

SOURCE: 6 = platform
SOURCE DETAIL: 1 = cabinet SOURCE ID: 0
PROBLEM DETAIL: 1 = inlet overtemp

CALLER ACTIVITY: E = system warning STATUS: 0
CALLER SUBACTIVITY: 00 = implementation dependent
REPORTING ENTITY TYPE: E = HP-UX REPORTING ENTITY ID: 00

0x00E000516100E000 00000000 00000000 type 0 = Data Field Unused
0x58E008516100E000 00006D07 08160C24 type 11 = Timestamp 08/08/2009 22:12:36
Type CR for next entry, Q CR to quit.
+ CR


Log Entry # 1 :
SYSTEM NAME: test-gsp
ALERT LEVEL: 8 = Boot Possible, performance impaired

SOURCE: 6 = platform
SOURCE DETAIL: 6 = service processor SOURCE ID: 0
PROBLEM DETAIL: 1 = selftest result

CALLER ACTIVITY: 2 = operation STATUS: 0
CALLER SUBACTIVITY: 03 = console
REPORTING ENTITY TYPE: 1 = service processor REPORTING ENTITY ID: 00

0x7010028166002030 01010000 003D0002 type 14 = Problem Detail
0x4810028166002030 72727570 496E7465 type 9 = ASCII Message Interrup
0x4810028166002030 72762E43 49326344 type 9 = ASCII Message I2cDrv.C
0x7010028166002030 00000000 000007E5 type 14 = Problem Detail
0x70100A8166002030 00000000 00000000 type 14 = Problem Detail
Type CR for next entry, - CR for previous entry, Q CR to quit.

any advice , gurus ?

[Viveki]

Hi,

There is no way to dump all logs in GSP as like MP. You have to keep pressing enter key to collect all the possible logs

[Raj D.]

n00body,

Perhaps in GSP there is not much facility to save log or dumps, you can save it from putty log capture:

In Putty --> go to Logging --> All Session output --> GSP-SL-Log.txt

Open the putty session --> connecto to GSP-->

In GSP , while in SL -->
Type CR for next entry, Q CR to quit

Press Carriage Return untill you reach to the end of the log.



Once you reached end of the log quit, GSP ad check the file GSP-SL-Log.txt (Remove unwanted entry ) and thats your GSP SL log.


Cheers,
Raj.




* Dont forget to assign points at the end.

[n00body]

Hi Raj ,
Yes , I've done the steps that you mentioned earlier , however there are too much logs because the server has not been rebooted for quite some time . I'm finding the way to display the logs all in one shot without keying in CR at each page .

Anyway , thanks for your input .

[Dennis Handly]

>way to display the logs all in one shot without keying in CR at each page.

If there is typeahead, just hold the key down. Or put something on it.

[Torsten.]

It depends on machine model and firmware if you have a dump option or not:

GSP> sl

Chassis Logs available:

(A)ctivity Log
(E)rror Log
(L)ive Chassis Logs

(C)lear All Chassis Logs
(Q)uit

GSP:> e

To Select Entry:
( or ) View next or previous block
(+) View next block (forwards in time)
(-) View previous block (backwards in time)
(D)ump entire log for capture and analysis
(F)irst entry
(L)ast entry
(J)ump to entry number
(V)iew Mode Select
(H)elp to repeat this menu
^B to exit




Here is (D) for dump available.