HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to reset MP (LanConsole)

 

How to reset MP (LanConsole)

Hi all,

we administrate several UNIX machines remote.
Now I forgot the MP login. Any chance to reset the MP remote?

Any help would be nice. Thanks
Regards
Juergen
7 REPLIES 7
Arunvijai_4
Honored Contributor

Re: How to reset MP (LanConsole)

Hello,

You can try with,

# stty +resetGSP < /dev/GSPdiag1

Also, look at these threads,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=594450
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1000385

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"
Tiziano Contorno _
Valued Contributor

Re: How to reset MP (LanConsole)

For a passwd reset you need to hard reset the MP pressing the reset button more than 5 seconds.

Re: How to reset MP (LanConsole)

Well what will be the default password after the reset? I can't do that, the machine is some 100km away:-((

This command did not work:
root@s263[/]# stty +resetGSP GSP reset failed.

The model is a HP 9000/800/rp3410

Thanks!
Sivakumar TS
Honored Contributor

Re: How to reset MP (LanConsole)


Hi,

There is a reset switch in the MP which you can use to reset the MP settings and password. Some servers (N class) you have to open the chassis to access this.
The default user is Admin\Admin

Regards,

Siva.
Nothing is Impossible !
Devender Khatana
Honored Contributor

Re: How to reset MP (LanConsole)

Hi,

The only option is to hardware reset of MP having physical access to the system. The command mentioned earlier do not work for MP but is for systems with GSP only.

HTH,
Devender
Impossible itself mentions "I m possible"

Re: How to reset MP (LanConsole)

Thank you all. A guy at the location will try to reset the hardware within this day.

Will let you know if it'll work then.

Thanks.
Juergen
Tiziano Contorno _
Valued Contributor

Re: How to reset MP (LanConsole)

Its default IP will be 192.168.1.1

To connect via cross cable from a Windows machine:
route add 192.168.1.1
user: Admin
passwd: Admin

To configure lan:
type CM then LC