HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to reset MP

 
SOLVED
Go to solution
Jerry_109
Super Advisor

How to reset MP

HP-UX B.11.11 U 9000/800/rp4440
######################################
Hello All,

Does anyone know how to reset the MP on my
rp4440? Currently when I connect the lan cable
there is no green light on the lan card. The cable has been checked, and it's seems to be ok. From the local console, all seems t oconfigured ok. I did view a "XD" command, but it indicated "destruction". Please advise.

Thanks

jlsims@scif.com
415 565-1630
8 REPLIES 8
IT_2007
Honored Contributor
Solution

Re: How to reset MP

you can see there is reset button white color one and you can reset it on the back side of rp4440.
Rashid Hamid
Regular Advisor

Re: How to reset MP

You can you xd command or press mp reset button at the back of rp4440
I'm Parit Madirono/Parit Betak Boyz
Prashanth.D.S
Honored Contributor

Re: How to reset MP

Hi Jerry,

XD command will reset the MP and also can be reset by pushing the reset button at the back of RP4440.

XD : Diagnostics and/or reset of management processor

With this command u can also check the MP health and connectivity status. The following tests are available..

â ¢ MP Parameter Checksum
â ¢ Verify I2C connection (get BMC Device ID)
â ¢ LAN connectivity test using ping
â ¢ Modem self-tests

A MP reset can be safely performed without affecting the operation of the server.

Best Regards,
Prashanth

Asif Sharif
Honored Contributor

Re: How to reset MP

Hi Jerry,

For reseting the MP there are two ways,

1.Reset the MP from back of server, There would be reset button, press it for few seconds, You MP will be reset.
2.XD: Diagnostics or reset of MP

This command enables you to perform some simple checks to confirm the MP's health and its connectivity
status. The following tests are available:

->MP Parameter Checksum
->Verify I2C connection (get BMC Device ID)
->LAN connectivity test using ping
->Modem self-tests

You can use the XD command plus its R command option to reset the MP. You can safely perform an MP reset
without affecting the operation of the server.

For more information please go into this link and download this document:"5971-4274_iLO_ops".

http://docs.hp.com/en/hw.html#HP%209000%20rp4410/rp4440%20Server

Regards,
Asif Sharif
Regards,
Asif Sharif
siva baskaran
Regular Advisor

Re: How to reset MP

hi,

simple way go to MP>cm then PC then press y/n [y]
mp will be reset

thanks
siva
scifusers
Advisor

Re: How to reset MP

Thanks you all,

I used the "XD -> R", and it still did not work. later I investigated the MP with the
CM -> LS , and the "link state" was set for "10BaseT". I changed this to "auto neg"
and all was ok.

Thanks you all.
scifusers
Advisor

Re: How to reset MP

Hello All,

I'm trying to assign points, but for some reason the system will not display the points selection field ?
sajeer_2
Regular Advisor

Re: How to reset MP


You logged in as Jerry for posting the qustion.Second time you logged in as "scifusers".That is why you are not able to find the option for assigning points.