I can't seem to get a login prompt vi webconsole.

[Jacques Carriere]

Anybody know why I get a black screen when I connect via Webconsole on an L class. I have tried modifying a few parameters without any success.

thanks
Jacques
jcarrier@psc-cfp.gc.ca

-------------------------------

P.S. This Thread has been moved from Servers --> General to Servers --> HP 9000 - Forum Moderator

[Efim Kushnir · Accepted solution]

Hello.
As I understand you success login to SWC through standart login from SWC and after it not see any information about server on screen.
The same way as your SWC has normal ping.

If your server has normal ping and telnet (or xWindows) from remote systems you can check the next features:

1. May be console lost physical connect to server (bad or damage cable)?
2. May be server is down ?

In extreme case you can reinstall SWC with new parameters.
For correct do it please visit: http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5191-96022/A5191-96022_top.html&con=/hpux/onlinedocs/A5191-96022/00/00/20-con.html&toc=/hpux/onlinedocs/A5191-96022/00/00/20-toc.html&searchterms=web%7cconsole%7csecure&queryid=20031029-215709

Hope it will be help you.
BR,
Efim

[Jacques Carriere]

thanks