HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Is HP supporting PA-RISC "9000/800/N4000-75"

 
SOLVED
Go to solution
Tim Nelson
Honored Contributor

Re: Is HP supporting PA-RISC "9000/800/N4000-75"

This does not answer your question directly but if HP will not fix the HW for mega-$$ then there are plenty of capable 3rd party vendors that will.
As well as the potential for you to purchase the parts @ a parts store and fix yourself.

( just another option )
Highlighted
Steven E. Protter
Exalted Contributor

Re: Is HP supporting PA-RISC "9000/800/N4000-75"

Shalom,

The end of support date for HP-UX 11.11 is December 31, 2013.

That is when OS support for the workstation ends.

Hardware support seems to end a year earlier December 31, 2012, though I may be wrong about that and support may already be over.

The system is very near obsolete end of life at this time as is the only OS it is certified for.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Kranti Mahmud
Honored Contributor

Re: Is HP supporting PA-RISC "9000/800/N4000-75"

Hi Senthil,

Check the below thread:

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1271662743731+28353475&threadId=1236533

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!
Kranti Mahmud
Honored Contributor

Re: Is HP supporting PA-RISC "9000/800/N4000-75"

Hi Senthil,

Check the below thread for the answer of your second question:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1271662875600+28353475&threadId=1330438

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!
S-M-S
Valued Contributor

Re: Is HP supporting PA-RISC "9000/800/N4000-75"

HP extended its PA RISC server support up to 2013