Is it possible to put more disks in a L1000?

[Carme Torca]

Hi,

I have one 9000/800/L1000-36 server. I have two disks. Is it possible to put more disks in this server?

Thanks a lot of,



> ioscan -fnCdisk
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
disk 2 0/0/1/0.1.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c0t1d0 /dev/rdsk/c0t1d0
disk 0 0/0/1/1.2.0 sdisk CLAIMED DEVICE FUJITSU MAJ3364MC
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 1 0/0/2/0.2.0 sdisk CLAIMED DEVICE FUJITSU MAJ3364MC
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0




> ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (582)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
lan 0 0/0/0/0 btlan3 CLAIMED INTERFACE HP PCI 10/100Base-TX Core
/dev/diag/lan0 /dev/ether0
ext_bus 0 0/0/1/0 c720 CLAIMED INTERFACE SCSI C896 Fast Wide Single-Ended
target 0 0/0/1/0.1 tgt CLAIMED DEVICE
disk 2 0/0/1/0.1.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c0t1d0 /dev/rdsk/c0t1d0
target 1 0/0/1/0.7 tgt CLAIMED DEVICE
ctl 0 0/0/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/1/1 c720 CLAIMED INTERFACE SCSI C896 Ultra Wide Single-Ended
target 2 0/0/1/1.2 tgt CLAIMED DEVICE
disk 0 0/0/1/1.2.0 sdisk CLAIMED DEVICE FUJITSU MAJ3364MC
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
target 3 0/0/1/1.7 tgt CLAIMED DEVICE
ctl 1 0/0/1/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
ext_bus 2 0/0/2/0 c720 CLAIMED INTERFACE SCSI C875 Ultra Wide Single-Ended
target 4 0/0/2/0.2 tgt CLAIMED DEVICE
disk 1 0/0/2/0.2.0 sdisk CLAIMED DEVICE FUJITSU MAJ3364MC
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0
target 5 0/0/2/0.7 tgt CLAIMED DEVICE
ctl 2 0/0/2/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/0/2/1 c720 CLAIMED INTERFACE SCSI C875 Ultra Wide Single-Ended
target 6 0/0/2/1.0 tgt CLAIMED DEVICE
tape 0 0/0/2/1.0.0 stape CLAIMED DEVICE HP C1537A
/dev/rmt/0m /dev/rmt/c3t0d0BEST /dev/rmt/c3t0d0DDS
/dev/rmt/0mb /dev/rmt/c3t0d0BESTb /dev/rmt/c3t0d0DDSb
/dev/rmt/0mn /dev/rmt/c3t0d0BESTn /dev/rmt/c3t0d0DDSn
/dev/rmt/0mnb /dev/rmt/c3t0d0BESTnb /dev/rmt/c3t0d0DDSnb
target 7 0/0/2/1.7 tgt CLAIMED DEVICE
ctl 3 0/0/2/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
tty 0 0/0/4/0 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag1 /dev/mux0 /dev/tty0p1
/dev/diag/mux0 /dev/tty0p0 /dev/tty0p2
tty 1 0/0/5/0 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag2 /dev/diag/mux1 /dev/mux1 /dev/tty1p1
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
ba 2 0/2 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
ba 3 0/3 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
ba 4 0/4 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
ba 5 0/5 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
ba 6 0/6 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
ba 7 0/7 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
memory 0 8 memory CLAIMED MEMORY Memory
processor 0 160 processor CLAIMED PROCESSOR Processor

[Luk Vandenbussche · Accepted solution]

Yes,

You can install 4 internal disks in a L1000

http://www.docs.hp.com/en/A5191-96022/ch01s06.html

[AwadheshPandey]

The rp54xx Series (Formerly L-Class) server has four internal disk drive bays and can support up to 292GB of storage. This section also includes compatible DAT tape drives for the rp54xx Series (Formerly L-Class) server.