HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Is the part of G-series HP 9000 could be used in K200?

 
Ricky_4
Frequent Advisor

Is the part of G-series HP 9000 could be used in K200?

Hi All,

We have an existing K200 and G-series . Is the part of G-series HP 9000 could be used in K200?such as CPU, memory and card installed.

Thanks.

Adriatico
5 REPLIES 5
Stefan Stechemesser
Honored Contributor

Re: Is the part of G-series HP 9000 could be used in K200?

Hi, the only parts you can use are:

- precision bus cards (SCSI, Network etc., not the Core I/O)
- terminal
- external mux panel

CPUs & Memory modules are incompatible with the K-Class.

best regards

Stefan
Andrew Rutter
Honored Contributor

Re: Is the part of G-series HP 9000 could be used in K200?

hi,

The only thing you can use is the HPPB cards in the G series.
example, network card and scsi cards in left hand side of the box viewed from the back.

mem/proc/coreio/disks are all different.

Andy
B. Hulst
Trusted Contributor

Re: Is the part of G-series HP 9000 could be used in K200?

Hi,

And don't forget the network transceivers on the network adapters, with the metal brackets. You can re-use them on some cisco equipment too. :-)

- Bob

Re: Is the part of G-series HP 9000 could be used in K200?

That old G class system has little or no use it preceeds the HP-PB architecture. The internal drives S.E. SCSI, that old system really does not have much use other than a boat anchor.
Andrew Rutter
Honored Contributor

Re: Is the part of G-series HP 9000 could be used in K200?

hi guys,

It seems your wasting your time answering as Adriatico obviously doesnt appreciate the answers people spend time giving, as he very rarely assigns point to anybody.

Andy