HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

K server locked on init c40 - tri cnsl 0123 message

 

K server locked on init c40 - tri cnsl 0123 message

Hi All,

My K server still locked on this message displayed on the digital panel :
init c40
tri cnsl 0123

Could you please give me more information about this status?

Regards
3 REPLIES 3
Jeff Schussele
Honored Contributor

Re: K server locked on init c40 - tri cnsl 0123 message

Hi Moreau,

The server is stopped at the console check.
If you don't have a console in place, hook one up.
If you do, it might be in a bad state & needs to be reset. Power it off & hold the D key for several seconds when powering up the console.
The possibility is also the "Autoboot" is turned off & the system is waiting for the
bo pri
sequence to continue boot. If so, the enter
setboot -b on
after system is up to turn it back on.

HTH,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Michael Steele_2
Honored Contributor

Re: K server locked on init c40 - tri cnsl 0123 message

Well, its one of these:

INIT C400 Retrieving the stable storage console path
INIT C40A Retrieving special console path


Do you see these?

Major Code 9: Console Initialization Errors
Ostat
Code
Description

WARN 9000 Stable storage console not found
WARN 9001 Alternate console(s) not found


Check for the HW path to your console
Support Fatherhood - Stop Family Law
Eugeny Brychkov
Honored Contributor

Re: K server locked on init c40 - tri cnsl 0123 message

If there's 700/96 terminal connected to the server then please press F4 key to force it to work in REMOTE mode and server will continue booting
Eugeny