HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

K360 CPU 2 & 3 not recognized.

 
SOLVED
Go to solution
Mark2010_1
Frequent Advisor

K360 CPU 2 & 3 not recognized.

Hello,

We have a K360 server with CPU0 & 1 working fine.

We got some sape CPU A4837-62003 and tried to upgrade our K server.

Once plugged, the system does not even boot on PDC.

On the front pannel we have Error Code 10 FC and 11 FC (tried 3 CPUs and 4 CPUs).

I know that CPU 0 & 1 are 180 Mhz + 1 Mb but can not confirm that our new CPU are compatible or not (got from K 380).

Any Idea plz ?
4 REPLIES 4
Patrick Wallek
Honored Contributor
Solution

Re: K360 CPU 2 & 3 not recognized.

The CPUs in the Kx80 series machines were 240 MHz CPUs.

I almost certain that the CPUs from the K380 will NOT work in the K360.
Mark2010_1
Frequent Advisor

Re: K360 CPU 2 & 3 not recognized.

Hi Patrick,

Got same feedback from http://partsurfer.hp.com/.

Thanks in advance for ur confirmation.
Pete Randall
Outstanding Contributor

Re: K360 CPU 2 & 3 not recognized.

You're right about your original CPUs. They are 180 Mhz PA8000. The ones from the K380 are either 200 or 240 Mhz PA8200 and thus incompatible with your system board. In order to utilize them you would have to upgrade the board, which would make the original CPUs incompatible.


Pete

Pete
Mark2010_1
Frequent Advisor

Re: K360 CPU 2 & 3 not recognized.

Thx.