K360 Server installation of 2nd CPU

[Rainer von Bongartz]

I have two K360 Servers, one with 4 CPU's and one with
1 CPU.

I want to take one CPU from server A and put it into server B.

Can this be done by simply changing the CPU or is HP
personel required to do some configuration on the backplane of the servers ???

[Patrick Wessel · Accepted solution]

Just do it. It's plug and pray

[Rainer von Bongartz]

OK...

I'll first pray, then plug, then hope...

[KapilRaj]

Hi ,

it's always better to have a H/W Engineer while doing it. Or still if you wanna do it , please take care of the following things

01. Remove your shoe (ESD Precaution)
02. If you have a wrist band use it or hold the rack / Server's cabinet (wherever you get a proper earthing)

03. ESD is nothing but The potential your body carry. it can damage your processor card.

04. No point in praying , I don't think god has some role here .....

Good luck,

kaps

[Vincenzo Restuccia]

See http://docs.hp.com/hpux/pdf/A2375-90012.pdf