HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

K380 warming 80F5

 
Rob Taylor_2
Occasional Visitor

K380 warming 80F5

I have a K380 showing WARN 80f5 in the LCD display, I have look and can't find anything about this alarm , anyone know what is for and any cure .

thanks
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: K380 warming 80F5

Hi Rob,

there may be something wrong with your boot path. Check the path and try to search for bootable devices. "sea ipl"

HTH

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: K380 warming 80F5

find more info in this thread

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=372687

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Kent Ostby
Honored Contributor

Re: K380 warming 80F5

WARN 80F5
Failed to initialize

Essentially, there is either a problem with your boot drive, path to your boot drive (i.e. the address you have entered for the boot path), or the bus that your boot drive is on.

One possible fix especially if you had a power problem (i.e. loss of AC) is to power

down the server
power down the disks
power up the disks
power up the server

This will fix the problem if the issue is that the box got up before the disks were ready.

If the problem continues and the boot path is correct, open a hw case with HP.

"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"
Rob Taylor_2
Occasional Visitor

Re: K380 warming 80F5

have done the above and now all cleared , thanks