HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

L1000 black out after memory change

 
reneguy_1
Advisor

L1000 black out after memory change

Hello,

I have one L1000 with 4GB RAM (8x512MB) and one L1500 with 1GB (4x256MB). I have put the L1000 RAM into the L1500 and the L1500 RAM into the L1000.

The L1500 work fine but the L1000 does not boot and nothing appear at the console. I've put the memory in slot 0A 0B 1A 1B in the L1000. As there's no feedback, i don't really know what's happen ;-(

Any idea?

Thanks.
11 REPLIES 11
cnb
Honored Contributor

Re: L1000 black out after memory change

Hi,

Are you sure the memory modules you installed are supported in the L1000?

What HP part numbers are the memory modules?
cnb
Honored Contributor

Re: L1000 black out after memory change

Hi,

Are you sure the memory modules you installed is supported in the L1000?

What HP part numbers are the memory modules?
Andrew Rutter
Honored Contributor

Re: L1000 black out after memory change

hi,

try and re seat the memory dimms and just install 0a/b first and then if that works 1a/b

its worth double checking the slots aswell that you think are 0ab/1ab? there not next to each other

Andy
reneguy_1
Advisor

Re: L1000 black out after memory change

Hello all,

I don't know if the memory are compatible or not. I was expected to see some hw errors message at the console (memory not compatible or something else...) but nothing happend.

This week, I will try to reseat the dimms and just in 0a/b.

Bye
reneguy_1
Advisor

Re: L1000 black out after memory change

hello all,

I have reseat memory, only in 0A0B with the "new" RAM and olso with the "old" ones. Nothing.

I'm wondering if something bad has happen to the gsp card: with another L1500, as soon as I plug the power cord, gsp information appears on console. With the L1000, console remains empty. Can an bad gsp card prevent host from booting?

Thanks.