HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

L2000a boot and reset issues

 
Ed Segura
Frequent Advisor

L2000a boot and reset issues

Anyone out there know what this error might be caused by
***** EARLY BOOT VFP : SYSTEM ALERT *****
SYSTEM NAME: L2000a-con
DATE: 06/04/2008 TIME: 18:54:02
ALERT LEVEL: 4 = Unexpected configuration change detected

REASON FOR ALERT
SOURCE: 8 = I/O
SOURCE DETAIL: 3 = local bus adapter SOURCE ID: FF
PROBLEM DETAIL: 3 = function failure

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH OFF ON ON
LED State: Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0x2000004383FF2093 000000FF FF0CFF83 - type 4 = Physical Location
0x5800084383FF2093 00006C05 04123602 - type 11 = Timestamp 06/04/2008 18:54:02
A/a: ack read of this entry - Q/q: quit Virtual Front Panel Display
Anything else redisplay the log entry
2 REPLIES 2
Avinash Agarkar
Valued Contributor

Re: L2000a boot and reset issues

Hi,

Try to remove all the external device connected to the server like tape drive any fc cables etc. and then try to boot the server.

Thanks,
Avinash
Great Power Comes With Great Responsibility
Ed Segura
Frequent Advisor

Re: L2000a boot and reset issues

That is usually what I do when I trouble shoot. Anyway the problem was solved the power supply 1 of 2 blew. Once I replaced it then I was able to load the server. Thanks for taking the time to reply. closing thread.