HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

L3000 error on GSP

 
ji_1
Occasional Contributor

L3000 error on GSP

hi everyone ..
i have a L3000 server and lately i had an error message in GSP log :

SOURCE:7=Memory
SOURCE DETAIL:1= Controller SOURCE ID:FF
PROBLEM DETAIL:7= error function

could anyone know what's the pb ?
Thanks .
4 REPLIES 4
Michael Tully
Honored Contributor

Re: L3000 error on GSP

You probably have a problem with one of your memor DIMMS, or the board that the DIMMS sit in. My suggestion is contact HP and give the the hex numbers at the base of all of the messages for the day of the log. They then should be able to tell you the exact problem from the hex numbers.
Anyone for a Mutiny ?
KCS_1
Respected Contributor

Re: L3000 error on GSP

Hi,

From the logs in GSP, it is able to suppose a momory DIMM problem is involved.
have any log in the syslog or dmesg??
If loged about relative memory problem, check it out in /var/opt/resmon/logs/eventlog


Call to HP or your sales representative.





Easy going at all.
Shaikh Imran
Honored Contributor

Re: L3000 error on GSP

Hi,
Also run stm and take the info of memory DIMMS and see if you get any single or double bit errors in the memory DIMMS.
Note this and re-check for atleast 2-3 times.
If yes pls log a call with hp giving the above details also.

Regards,

I'll sleep when i am dead.
aliasgar
Valued Contributor

Re: L3000 error on GSP

Hello Ji,

Can u send the gsp log output.


Thanks/Regards,
Aliasgar.
aliasgar