L3000 server issue

[kevin poole_1]

How would I go about getting the server torecognise the dvd drive that is installed. Currently the only two boot paths displayed are, intscsia, and b which are the scsi drives. The search will not return the dvd drive at all. I am a little frustrated with this server at the moment, so any help would be great. Kevin

[Torsten. · Accepted solution]

Hi,

it should look like this:

Main Menu: Enter command or menu > sea

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 0/0/1/1.2 intscsib.2 Random access media
P1 0/0/2/0.2 intscsia.2 Random access media
P2 0/0/2/1.2 Random access media

the path 0/0/2/1.2 is the default for the internal DVD drive. Try to power cycle the server.

[kevin poole_1]

Solution found. Thank you everyone.:)